\r\n\r\n\t\t\t
\r\n\r\n\t\t\t
ESP 360 E motion sensor is designed for indoor ceilings and has a photocell function. It is used for automatic lamp activation by detecting movement of people, medium and large animals and objects through an infrared sensor that recognizes heat sources.
\r\n\t\t\t\r\n\t\t\r\n\t\r\n\r\n\r\n\r\n\t\t\t\r\n\r\n\t\t\tTurns the light on and off immediately\r\n\t\t\t \r\n\r\n\t\t\tYou no longer have to press the switch to turn lights on or off. ESP 360 E sensor detects presence and automatically sends a command to the lamp that switches on. And after a predetermined time without detecting presence, the sensor sends another command and the lamp switches off. It is compatible with any type of lamp. \r\n\t\t\t | \r\n\t\t
\r\n\t\t\t\r\n\r\n\t\t\tPhotocell Function\r\n\t\t\t \r\n\r\n\t\t\tAdjust the amount of brightness that the equipment will switch on the lamp if there is movement. In this way, if the setting is in Sun position, equipment will switch on the lamp day and night when it detects movement. However, if the adjustment is in position Moon, the equipment only will turn on the light at night when it detects motion. \r\n\t\t\t | \r\n\t\t
\r\n\t\t\t\r\n\r\n\t\t\t\r\n\r\n\t\t\tTime control\r\n\t\t\t \r\n\r\n\t\t\tYou can set how long the lamp will stay on after the device detects the last move. The time setting can vary from 10 seconds to 7 minutes. Every time the equipment identifies movement, it will reload setting time on the drive. Therefore, the sensor will only turn off the lamp when the set time has passed and no further motion is detected during this period. \r\n\t\t\t | \r\n\t\t
\r\n\t\t\t\r\n\r\n\t\t\t\r\n\r\n\t\t\tDetection range\r\n\t\t\t \r\n\r\n\t\t\tThe sensor must be installed at a minimum height of 2 meters and a maximum of 4 meters. It has a detection angle of 360 ° and a range of 6 meters. \r\n\t\t\t | \r\n\t\t
\n\n\n\n ESP 360 E motion sensor is designed for indoor ceilings and has a photocell function. It is used for automatic lamp activation by detecting movement of people, medium and large animals and objects through an infrared sensor that recognizes heat sources. \n | \n
\n\nTurns the light on and off immediately\n\t\t\t \nYou no longer have to press the switch to turn lights on or off. ESP 360 E sensor detects presence and automatically sends a command to the lamp that switches on. And after a predetermined time without detecting presence, the sensor sends another command and the lamp switches off. It is compatible with any type of lamp. \n | \n
\n\nPhotocell Function\n\t\t\t \nAdjust the amount of brightness that the equipment will switch on the lamp if there is movement. In this way, if the setting is in Sun position, equipment will switch on the lamp day and night when it detects movement. However, if the adjustment is in position Moon, the equipment only will turn on the light at night when it detects motion. \n | \n
\n\n\nTime control\n\t\t\t \nYou can set how long the lamp will stay on after the device detects the last move. The time setting can vary from 10 seconds to 7 minutes. Every time the equipment identifies movement, it will reload setting time on the drive. Therefore, the sensor will only turn off the lamp when the set time has passed and no further motion is detected during this period. \n | \n
\n\n\nDetection range\n\t\t\t \nThe sensor must be installed at a minimum height of 2 meters and a maximum of 4 meters. It has a detection angle of 360 ° and a range of 6 meters. \n | \n