
\r\n\r\n\t\t\t
ESP 360 motion detector is designed for indoor ceilings and it hasPhotocell function. It is used for automatic lamp activation by detecting movement of people, medium and large animals and objects through an infrared sensor that recognizes heat sources. In that way, the product combines features of practicality, energy saving and safety.
\r\n\t\t\t\r\n\t\t\r\n\t\r\n\r\n\r\n\r\n\t\t\t\r\n\r\n\t\t\tTurns the light on and off automatically\r\n\t\t\t \r\n\r\n\t\t\tYou no longer have to press the switch to turn lights on or off. ESP 360 sensor detects the presence and automatically sends the command to thelamp that switches on. And after a predetermined time without detecting presence, the sensor sends another command and the light switches off. It is compatible with any type of lamp: fluorescent, incandescent or LED. \r\n\t\t\t | \r\n\t\t
\r\n\t\t\t\r\n\r\n\t\t\tPhotocell and Sensibility Function\r\n\t\t\t \r\n\r\n\t\t\tAdjust the amount of brightness that the equipment will switch on the lamp if there is movement. In this way, if the setting is in position Sun, the device will switch on the light during the day and the night, when it detects motion. However, if the adjustment is in position Moon,the equipment will only turn on the light at night, when it detects motion. In addition, you can adjust the sensor sensitivity for heat presence with Sensibility \r\n\t\t\tfunction. | \r\n\t\t
\r\n\t\t\t\r\n\r\n\t\t\tTime control\r\n\t\t\t \r\n\r\n\t\t\tYou can set how long the lamp will stay on after the device detects the last move. The time setting may vary from 10 seconds (minimum) to 10 minutes (maximum). Every time the device identifies motion, it will recharge triggering set time. Therefore, the sensor will only turn off the lamp when the set time has passed and no further motion is detected during this period. \r\n\t\t\t | \r\n\t\t
\r\n\t\t\t\r\n\r\n\t\t\tDetection range\r\n\t\t\t \r\n\r\n\t\t\tThe sensor must be installed at a minimum height of 2.2 and a maximum of 4 meters. It has a detection angle of 360° and has a range of up to 6 meters. \r\n\t\t\t | \r\n\t\t
\n\nESP 360 motion detector is designed for indoor ceilings and it hasPhotocell function. It is used for automatic lamp activation by detecting movement of people, medium and large animals and objects through an infrared sensor that recognizes heat sources. In that way, the product combines features of practicality, energy saving and safety. \n | \n
\n\nTurns the light on and off automatically\n\t\t\t \nYou no longer have to press the switch to turn lights on or off. ESP 360 sensor detects the presence and automatically sends the command to thelamp that switches on. And after a predetermined time without detecting presence, the sensor sends another command and the light switches off. It is compatible with any type of lamp: fluorescent, incandescent or LED. \n | \n
\n\nPhotocell and Sensibility Function\n\t\t\t \nAdjust the amount of brightness that the equipment will switch on the lamp if there is movement. In this way, if the setting is in position Sun, the device will switch on the light during the day and the night, when it detects motion. However, if the adjustment is in position Moon,the equipment will only turn on the light at night, when it detects motion. In addition, you can adjust the sensor sensitivity for heat presence with Sensibility \n\t\t\tfunction. | \n
\n\nTime control\n\t\t\t \nYou can set how long the lamp will stay on after the device detects the last move. The time setting may vary from 10 seconds (minimum) to 10 minutes (maximum). Every time the device identifies motion, it will recharge triggering set time. Therefore, the sensor will only turn off the lamp when the set time has passed and no further motion is detected during this period. \n | \n
\n\nDetection range\n\t\t\t \nThe sensor must be installed at a minimum height of 2.2 and a maximum of 4 meters. It has a detection angle of 360° and has a range of up to 6 meters. \n | \n